Lighting consultant Terry McGowan said that if a touch lamp has a mechanical switch, it will work with any CFL or LED bulb. However, if the lamp has an electronic switch, you’ll need to use a CFL or LED bulb that’s specially marked as dimmable.

Does touch lamps need special bulbs?

You do not need a special bulb for a touch lamp. You just bought a touch lamp, which you can turn on and off by touching the base of the lamp. You might wonder if your lamp requires a special bulb, but it doesn’t. You can use any standard bulb for your touch lamp.

Can I use LED bulbs in my touch lamp?

A dimmable LED bulb that works with touch lamps. Using only 6 watts, this offers 470 lumens on the brightest setting (equivalent to around 45 watts). It is also suitable for use with dimmer switches.

Do touch lamps need dimmable bulbs?

What Type of Bulbs to Use? It’s worth noting that touch-sensitive lamps that are dimmable require a dimmable bulb or LED equivalent. Factor this in when you’re planning to buy a touch lamp and avoid the disappointment of setting up the lamp at home only to realise that you need to buy a bulb before you can use it.

Does it matter what bulb I put in my lamp?

As long as you don’t put a bulb that uses more than 60 watts in that socket you will be fine. The good news is the energy-saving bulbs that replace a 60-watt incandescent will only use 10 to 15 watts, depending on the actual bulb you buy, and give off the same amount of light.

Can I use a halogen bulb in a touch lamp?

YES! You should not touch halogen capsule bulbs with your fingers. … If you touch the bulb with your fingers, the salts and oils from your skin will damage the bulb and cause the heat to concentrate. This can significantly reduce the life of the bulb or even worse cause it to shatter.

What kind of bulb goes in a touch lamp?

Use an incandescent light bulb to check the lamp’s operation after plugging it back in. A compact fluorescent light (CFL) or LED (light-emitting diode) bulb only works in touch lamps if it is labeled as dimmable. Unplug the touch lamp and remove the light bulb if it still doesn’t work.

What happens if you put a non-dimmable LED bulb in a dimmer?

So what happens if you use non-dimmable LEDs on a dimmer? Well, at best the bulb just won’t dim properly. … But non-dimmable LEDs are only designed to be either fully powered ON or OFF, which means the circuitry inside won’t be able to handle low or pulsing current levels and will eventually become damaged.

Can you put a dimmable bulb in any lamp?

The short answer to this question is: Yes, you can use dimmable LEDs without a dimmer switch, just like normal light bulbs. … This means that LED retailers can now offer dimmable LED bulbs at a comparable price to non-dimmable versions, so holding stock of non-dimmable LEDs is becoming unnecessary.

Can I use an LED bulb in a 3 way lamp?

It’s OK, it’s perfectly safe. The three way sockets are designed to accept and work like a one-way if that is the bulb installed. Being an LED won’t change anything of importance as long as the base contacts are made right.

Article first time published on

Can you use smart bulbs in a touch lamp?

Smart bulbs do work with touch lamps, but are an unnecessary spend, since the lamp already controls brightness. To use a smart bulb, turn the touch lamp to maximum brightness and then control it with the smart bulb app.

Can you use a dimmable LED bulb in a touch lamp?

Q 6: Do LEDs work in touch lamps? A: No. Unless the lamp has trailing edge dimming. It would be best to consult the manufacturer.

Do touch lamps work with smart bulbs?

Smart plugs will work with touch lamps. Smart plugs simply turn the flow of electricity to the appliance or appliances that are plugged into it on or off. Touch lamps will turn on or off with a touch if they have enough electricity powering them and they have a working light bulb.

Can I use an appliance bulb in a lamp?

Yes. As long as the base has the correct fitting, you can use an appliance bulb in a lamp. It is worth noting that appliance bulbs are more expensive than regular bulbs and won’t be as efficient.

Are light bulbs interchangeable?

You can use any type of bulb for electric lights – LED light bulbs, incandescent light bulbs, fluorescent light bulbs, and so on. All light bulbs are designed to be powered by electricity.

How do I know what kind of light bulb I have?

Light bulbs are identified by the diameter, length, shape, and screw type. This is done in the form of letter followed by a number. A normal household light bulb is on average a 60 watt light bulb. In technical terms it is an A19 type bulb.

Can you use a non dimmable bulb in a dimmable lamp?

Dimming LED lamps can save energy and changes the visual appearance and mood of your space. You can use a dimmable LED lamp in a non-dimmable circuit. You should NOT use a non-dimmable lamp in a dimmable circuit as it may cause damage to the lamp and or circuit.

Can you fix a touch lamp?

Always unplug a touch lamp before you repair it. … A touch lamp utilizes a sensor that lets you turn the lamp on or off with the touch of your hand. It can be more difficult to repair a touch lamp because you must disassemble it befor replacing any parts.

Why is my touch lamp flickering?

Touch lamps that use different intensities — low, medium and high — have bulbs that flicker on and off at different speeds. Other causes for flickering of the touch light are power usage from another appliance, a loose bulb or a dusty socket.

What happens if you touch a xenon bulb?

We don’t recommend touching them with bare hands, even when cool. The oil your hands leave behind on the glass will eventually heat up and may cause an imbalance, making the light bulb rupture. Xenon light bulbs don’t produce as much heat, and emit minimal UV rays.

Why does my touch lamp not turn off?

Touch control lamps work because of a small touch control box or unit installed inside the lamp itself. … Depending on when the touch control box fails, your touch lamp could be stuck in the on position and not turn off. Replacing the touch control box inside your touch lamp will correct this problem.

Can you use a dimmable bulb in a 3 way lamp?

You can get 3-way LED bulbs that have two independent circuits, but they cost more. A dimmable bulb won’t work, you need a bulb that has the two separate circuits. Dimmable lamps work by simply limiting the power going into the one normal circuit.

What is the difference between dimmable and non-dimmable bulbs?

Ultimately, your bulb can get damaged. Dimmable LEDs, on the other hand, have special circuitry inside. This makes them able to respond to changing phase forms that produce the dimming effect. Non-dimmable LEDs are designed to either be fully powered ON or OFF.

Can I use regular bulbs with a dimmer switch?

One of the most utilitarian bulbs, incandescent bulbs work with any dimmer switch on the market. … However, if the voltage is too strong, these bulbs may burn out. A dimmable fixture is one way to conserve energy and increase the lifespan of an incandescent bulb.

Can any light be dimmable?

Most light fixtures will work with standard dimmer switches, including those with halogen and incandescent lamps. … LED fixtures, for instance, may work with standard dimmers, but some may need a specialized dimmer. Likewise, not all compact fluorescent (CFL) light fixtures can be dimmed.

Can you mix LED and incandescent bulbs on the same dimmer?

This is a no no. Mixing LED with incandescent lighting causes poor performance. If using both on the same circuit, your incandescent light will draw more power, causing the LED to flicker. The better advice would be, if you change one, change them all.

How do you dim a light without a dimmer?

You just simply replace your current bulb with the SceneChange bulb, then you can just toggle your existing light switch on the wall or on a lamp to change the light setting. You can simply adjust the light from cool white to warm white to a warm glow with different brightness.

Do three-way bulbs work in any lamp?

A 3-way socket has three electrical contacts. … Thus, if a 3-way bulb is screwed into a standard light socket that has only a center contact, only the medium-power filament operates. In the case of the 50/100/150 W bulb, putting this bulb in a regular lamp socket will result in it behaving like a normal 100 W bulb.

Can I use a smart bulb in a 3 way lamp?

Yes, it will work in the socket of a 3 way lamp. Turn the switch on the lamp up to it’s full brightness and leave it there. Then control the bulb with the Hue hub app.

Why do my 3 way light bulbs burn out so quickly?

There are many possible reasons why a light bulb burns out quickly: The power supply voltage may be too high. Bulbs may be loose or connected improperly. Excessive vibrations may be causing the filament to break.

Can you use Philips hue with touch lamps?

No, Philips Hue is not compatible with touch lamps. This is because Philips Hue bulbs are meant to be controlled on an app or through a dimmer switch sold separately by Philips.