Minwax® Wipe-On Poly provides a durable layer of topcoat protection but it is thinner than regular polyurethanes. It can be used on floors to touch up small areas that are worn or scratched.

Is Wipe on Poly the same as polyurethane?

Wipe-on polyurethane is simply standard polyurethane that has been thinned with mineral spirits. The advantage: there’s no need to worry about brush strokes, drips, or reaching difficult places. … A few coats of wipe-on poly are sufficient to protect and seal the wood and give it a nice finished look.

Is Wipe on Poly better than brush on?

Wipe-on Poly is best for small projects and new woodworkers unwilling to go through the stress of using a brush. It is also important when you can’t risk any brush marks, drips, or runs. Even though wipe-on Poly can’t be used on floors, it can be used as a touchup for hardwood floors and any other type of furniture.

What kind of polyurethane do you use on floors?

Minwax® Super Fast-Drying Polyurethane for Floors is a clear, oil-based, durable, protective finish specifically formulated for use on hardwood floors. Superior durability for hardwood floors. Optimized drying technology results in faster recoat time between coats.

How do I get a smooth finish with Wipe on Poly?

Wash it first with dish soap and water, then lightly sand the old finish with 220-grit sandpaper. Vacuum off the dust, then apply the finish as usual. Apply at least two coats to achieve an even sheen.

Is Wipe-On Poly just thinned?

It is a pre-thinned version of the same polyurethane we know and love, but in a fancy container. … Wipe-on polyurethane or wiping poly is too thin to be applied effectively using a brush or a roller.

What kind of rag do you use for Wipe-On Poly?

Here’s what I use when I apply wipe on poly to a finished piece of furniture: Minwax clear gloss wipe on poly. Minwax satin finish wipe on poly. White, lint-free cotton rags.

How do you clean polyurethane floors?

Cleaning and Maintenance Maintenance of your polyurethane-coated hardwood flooring should include regular dust mopping & damp mopping only; do not wet mop. We suggest using only steam mops, or damp mopping using distilled white vinegar, or glass cleaners heavily diluted with water to clean your flooring.

What is best way to apply polyurethane on floor?

The best practice is to apply three coats of polyurethane, allowing the floor to dry, and lightly sanding it between coats. Some finishers offer lower estimates for two coats, but your floor won’t have the same level of protection, and scratches will go through to the wood more easily.

What happens if you don't sand between coats of polyurethane?

For some types of poly, nothing happens if you don’t sand between coats of polyurethane. However, most polyurethane will not adhere properly if you skip sanding dust nibs and brush marks on the finish. The polyurethane finish will eventually peel off or become deformed.

Article first time published on

Is Wipe on Poly durable?

Minwax® Wipe-On Poly is a durable, clear finish that combines polyurethane protection with classic, hand-rubbed beauty. Applied with a cloth – no need to worry about drips and brush marks. Great for furniture, railings and trim.

How many coats of wipe on poly do you need?

As a rule, it takes three coats of wipe-on to match the buildup that you get from one coat of brush-on poly. That said, the speed of wipe-on application often makes up for those extra coats.

Does Wipe on Poly yellow?

The Best Non-Yellowing Water-Based Polyurethane It’s easy to use, dries within a few hours, can be applied multiple times within 24 hours, dries completely clear, and doesn’t yellow over time.

Can you apply Poly with a rag?

Polyurethane is so durable and water-resistant, it has largely replaced shellac and varnish as a wood finish. Originally, it had to be brushed on, but different formulations mean it can now be applied as a spray or by wiping it on with a rag.

Is Wipe on Poly waterproof?

In Chris Minick’s article on wipe on finishes, the table suggest that Minwax Wipe-On Poly has excellent waterproof characteristics.

How long does Wipe on Poly take to cure?

Wipe-On Poly will dry to the touch in 2-4 hours, to handle in 8-12 hours and can be recoated in 4-6 hours. Full cure will be achieved in 24 hours. Use paint thinner or mineral spirits.

Can I make my own Wipe on Poly?

First, you can use any full strength oil based clear finish. Polyurethane varnish or non-poly varnish is fine. If you are making your own wipe-on the mix is scientific – thin. I suggest 50/50 with mineral spirits because it is easier to type than any other ratio and easy to remember.

Can you make your own water based Wipe on Poly?

For water borne polyurethane I use tap water or distilled water (never well water) as my thinning agent. To make your own wipe on polyurethane I recommend thinning to 50/50. One part polyurethane to one part thinning agent. There are two things you should know about the first coat.

What is Wipe on Poly made from?

You see, oil-based wipe-on polyurethane is essentially a diluted form of polyurethane finish thinned with paint thinner. … As a thinner, you can use mineral spirits, turpentine or most other commercial oil paint thinners.

How long before you can walk on a polyurethane floor?

Fresh polyurethane can be walked on as soon as all signs of wet finish disappear. You may be able to walk on the floor as soon as two hours after applying WBP and eight hours after applying WBP. You should wait two days before moving furniture onto a floor finished with WBP — four days for OBP.

Will bubbles in polyurethane go away?

Will polyurethane bubbles go away? If you see polyurethane bubbles on your project as you are applying it, most of them will go away within 5 minutes. However, if there are large bubbles after 5 minutes, those bubbles will not go away after the polyurethane has dried.

Can you sleep in house after polyurethane?

We recommend a minimum of 2 days of socks-only traffic for floors finished with oil polyurethane. The house is not inhabitable for a minimum of 2 days after the job is completed, and better to stay out for at least 5 as the fumes/off-gassing is not advisable to breathe in, even if there are other rooms to sleep in.

How do you keep polyurethane floors shiny?

1. Step One: Remove Debris from the Surface. The first thing you need to do is get rid of dust and dirt from your floor. …
2. Step Two: Mop Up the Stains. …
3. Step Three: Buff it for Gleaming Results!

Can you use Murphy's Oil Soap on polyurethane?

There seems to be very convincing evidence against products like Murphy® Oil Soap™ when manufacturers and industry experts, for the most part, will not recommend it for polyurethane-coated solid hardwood flooring.

Can I put a second coat of polyurethane on without sanding?

There you have it! It is safe to say you can apply several coats of polyurethane without sanding between them and not even bat an eye. Your wood project will still turn out beautifully. So save the time and the extra money on sandpaper, and apply polyurethane with a foam brush to get the finish you want!

What happens if you recoat polyurethane too soon?

No matter how many coats you apply, it should not become “glossy”. It’s all about adhesion. When you recoat after 2 hours you get a chemical bond between layers. If you let it go longer than that, you need to wait 24 hours so it’s hard enough to sand and get a mechanical bond.

How many coats of polyurethane should you put on a hardwood floor?

You should apply at least three coats of polyurethane on hardwood floors. Of course, this will depend on the type of polyurethane you are using. Oil-based polyurethane will rarely need more than three coats on floors. Hardwood floors are high traffic areas, so you need a nice, thick layer to protect the wood for years.

How good is Minwax Wipe-on Poly?

All but two of the finishes tested fared well, but the Minwax Wipe-On Poly was particularly impressive, drying in three hours to a light satin sheen and offering excellent water resistance. It’s a thin finish that requires more coats to build when brushing, but it still yields good results.

Is Tru oil a hard finish?

The more coats, the shinier it will get. Designed for finishing gun stocks, this is a very durable finish that will last under fairly hard use. It’s a favorite finish for guitar makers as well, and those see some pretty hard use. The very last step is to let the finish cure for about a week.

Can you use Minwax Wipe on Poly over paint?

Can I Use Minwax Polyurethane On Painted Wood? … polyurethane is not recommended for painted furniture, because it tends to yellow over time. It is also oil-based, which is best applied to stained wood and other oil-based paints.

Which is better Polycrylic or polyurethane?

Oil-based polyurethane is very durable, making it the best choice for refinishing wooden floors or furniture that gets a lot of use, such as a table. … Polycrylic is a water-based product that is far less smelly and toxic than either type of polyurethane, making it easier to work with.