Toilet height is measured from the floor to the top of the seat. Heights vary enough to be noticeable. Most often, they fall somewhere between 15” and 19”, with standard toilets coming in under 17”. However, chair height toilets, what Kohler refers to as Comfort Height® toilets, measure 17” or more.

Can you get different height toilets?

That’s when an ADA or comfort height toilet can make a difference. A standard size toilet will have a seat height of between 15 to less than 17 inches. So a comfort height toilet will rightfully provide an additional 3 to 4 inches in height.

How many different toilet heights are there?

Chair Height vs Standard Height Comparing comfort height with standard height is not too different as comfort height has the same connotation as chair height. Chair height and standard height are the two standard toilet heights that are used as a basis at the present.

What is the highest height a toilet comes in?

DescriptionSpecificationBowl Height / Seat Height20 inches / 21 inches

What is the height of a standard toilet?

Standard toilet height is around 14 1/2” from the floor to the bowl rim, without a toilet seat. In recent years toilet bowl height has increased to assist people with sitting and standing up, for the benefit of taller people, and those with physical handicaps and/or the elderly.

Who makes the tallest comfort height toilet?

The Highline® Tall is Kohler’s tallest toilet – a full 2″ taller than Comfort Height® toilets to provide ultimate accessibility and ease of use.

Are comfort height toilets more expensive?

For example, a comfort height, elongated bowl, two-piece Kohler toilet will cost approximately $168. … On the other hand, a standard height, elongated, two-piece American Standard toilet will cost approximately $170. The cost of installation will be the same for a total cost of $348.

Why would I want an elongated toilet bowl?

Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.

Are elongated toilets taller?

Space. The exact measurements of a toilet are up to the manufacturer. In general, an elongated bowl will be roughly 2-inches longer in the front than a round bowl.

What is the difference between standard height and comfort height toilets?

The difference between standard height and comfort height toilets is approximately two inches. … It will measure 17 to 19 inches from the floor to the seat. Often this height toilet is priced less than the standard height toilet.

Article first time published on

What sizes do toilets come in?

Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″. Now you can find the perfect toilet.

Is a 1 piece or 2 piece toilet better?

Performance-wise, there is no difference between the one-piece and two-piece toilets. They can have the same flushing power and efficiency. The interior parts are almost identical if they are from the same manufacturer. They may even have the same features and specifications.

What is best comfort height toilet?

1. KOHLER K-3589-95 Cimarron Chair Height Toilet. …
2. WOODBRIDGE T-0019, Dual Flush Comfort Height Toilet. …
3. Convenient Height Extra Tall Toilet. …
4. Kohler K-3658-47 Highline Classic Class Comfort Height Toilet. …
5. TOTO GMAX CST744SL Drake 2-Piece Comfort Height Toilet Our Top Pick.

Do all toilets fit the same?

For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. … If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.

What is a handicapped toilet?

An ADA toilet, also known as disabled toilets, handicap toilets and/or comfort height toilets, are designed to address the inconvenience bought by disabilities by providing more space and hand bars. Generally speaking, an ADA toilet is one that is compliant with the requirements of the American Disabilities Act.

What is a high level toilet?

High level toilets are that classic traditional style, with a cistern fitted to the wall above the toilet approximately 2 metres high. … With period details such as metal flush pipes, flush handles on chains, wooden seats and ornate cistern brackets, a high level toilet completes a Victorian or Edwardian bathroom look.

What does 12 inch rough in mean for toilets?

The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″. … Rear-outlet toilets are configured a bit differently.

How do I tell if my toilet is round or elongated?

Toilet seats are sold by shape (not by length). If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat. Notice also that the elongated bowl is shaped more like an oval (egg-shaped).

Which is better toilet round or elongated?

Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.

Can I put a round toilet seat on an elongated toilet?

Can I Install A Round Toilet Seat On An Elongated Toilet? While you can install a round toilet seat on an elongated toilet, it isn’t recommended. A round toilet seat will not fully cover the toilet bowl rim of an elongated toilet leaving the rim exposed.

Are dual flush toilets better?

Again, dual-flush toilets save around 67 percent of water used compared to regular toilets. … Typically the solid waste button will perform a regular flush (1.6 gallons) and the liquid waste will only use half the amount of water (0.8 gallons).

Are Square toilets comfortable?

Although most of us are used to circular varieties, the square toilet seat is often said to be more comfortable than traditional shapes. This is because a square toilet seat often delivers more support underneath the thighs when seated – much like a chair.

Which toilet shape is most comfortable?

Comfort: Most adults feel an elongated-style toilet bowl is more comfortable to sit on than a compact-size toilet bowl because the longer seat supports more of the thigh and because there is a larger opening, making it easier to reach down inside the bowl to wipe yourself after using the toilet.

Are high toilets bad?

The higher bowl height can be good for the knees and back and can offer real advantages to taller folks, the elderly and people with mobility problems—these toilets are extremely popular and widely used. … And if you’re short or there are small children in your household, a right-height toilet may not be your best bet.

How do I choose a toilet bowl?

Feel if the bowl shape and size is right. There are elongated toilet bowls that allow you to rest your thighs while sitting down. However, if you are struggling with a tight bathroom, a compact-size toilet bowl might be a better choice. When choosing a toilet bowl, also make sure the design is easy to clean.

How do I know if my toilet is a 10 or 12 rough?

If the old toilet is still there, measure from the center of the capped bolts (on the bottom) to the wall (not the baseboard). There should be 24 inches of clearance from the wall facing the bowl and 15 inches on each side as a guideline. If your measurements are between 11.5 and 12.5 inches, it is a 12-inch rough-in.

Are toilet sizes universal?

Are there different sizes of toilet? Yes, toilets come in a range of different sizes, that’s why it’s important to measure your existing toilet seat before you buy.

Can you replace a 10 inch rough-in toilet with a 12-inch rough-in toilet?

The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.

How often should toilet be replaced?

Typically, toilets need replacement after 25 years of use so this can be considered the average toilet lifespan. Some would argue that the porcelain toilet itself has a much longer, and even unlimited, lifespan and that it’s only the components inside that need repairs and replacements.

What do I need to know before buying a toilet?

While there are many features to consider when buying a toilet, including height, bowl shape, color, style, and flushing technology, most toilets fall into one of two basic types: gravity-feed and pressure-assisted. Gravity-feed toilets dominate the market, but pressure-assisted models are worth a look.

What is best toilet brand?

• Best Overall Toilet: Kohler Corbelle K-3814-0.
• Best Toilet for Modern Spaces: Swiss Madison Well Made Forever One Piece Toilet.
• Best Two-Piece Toilet: TOTO Promenade 2-Piece Toilet.
• Best Value One-Piece Toilet: Glacier Bay 1-piece Dual Flush Toilet.