How do I fix my Hotpoint washing machine F01?

When your washer dryer shows error message F01, we advise you to disconnect and unplug your Hotpoint washer dryer from the mains supply for 3 minutes. After 3 minutes have passed, reconnect your Hotpoint washer dryer and wait 30 seconds before you start up the machine again.

What does F01 mean on a Hotpoint dishwasher?

Anti-flooding overflow Issue
F01 — Anti-flooding overflow. Issue: The LED lights on your dishwasher are displaying in the following sequence (please see below these error codes for your LED reference)

What is F01 on washing machine?

The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. Be sure to unplug the washer before accessing internal components.

How do I fix Indesit F01 error?

Indesit error F01

1. Turn off the washing machine and unplug the connector.
2. Wait 2 minutes and put the connector back in.
3. Wait 30 seconds and turn the washing machine back on.

What does F01 mean?

The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines.

Can you reset a Hotpoint dishwasher?

Wait 2 minutes to reset the dishwasher if you press the “Start/Reset” pad. If the problem persists, you can reset the dishwasher by turning off the power to the unit for 30 seconds. The dishwasher should function normally if power is restored.

What does Error F01 mean?

failed electronic machine control board
The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines.

How do I fix E01 on my washing machine?

First, unplug the cord and check the status of the outlet – voltage, polarity, grounding, dedicated circuit. If everything is normal, switch on the washing machine again, letting it stand for 1 – 5 minutes beforehand. This will help restart the unit and reset error code E01 F01.

Why is my washer saying fo5?

F05 means there is a problem with the pump or there is a waste pipe issue. This problem will mean that your washing machine door may not release, leaving your washing trapped inside, or if it is opening, your washing will be sat in a pool of undrained water.

What does error code F01 mean on Hotpoint?

F01 The first code is F01. This message will tell you that there’s a fault in the Hotpoint electronic circuit board. To remedy this, you should unplug the machine and leave it for two minutes.

What are the error codes on a Hotpoint washing machine?

Undo. Hotpoint Washer Error Codes. F01 – Electronic circuit board fault. F02 – Motor circuit fault. F03 – Temperature sensing fault. F05 – Waste pipe blockage or pump issue. F06 – Door lock fault.

What does F11 mean on a Hotpoint washing machine?

The next Hotpoint error code which we’re going to look at is F11. It’s what you’ll see when there’s a fault with the pump circuit. This problem isn’t one you can fix, which makes a professional the best option. F12. F12 is a fault with the electronic control system, and it manifests as the washing machine not turning on properly.

What does the error code F07 mean on a whirlpool washing machine?

The error code F07 is the machine telling you that there’s a fault with the electronic circuit board, or that there’s a problem with the heating circuit. This error message is unique in that it shares part of its meaning with F01, so always make sure you suggest both faults to a professional.