Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.

How do you reinforce a wood closet rod?

1. Replace a flimsy metal or plastic closet rod with a solid wooden dowel. …
2. Replace cracked, broken or weak end-mounting brackets with thick and sturdy PVC pipe end caps. …
3. Push a solid dowel rod into a hollow closet rod. …
4. Attach closet rod support brackets at various points along the closet rod.

What size is a wood closet rod?

Most closet rods are 1 1/4 inches wide. This standard diameter gives the rod stability and prevents bending under heavy loads. A wood rod of this diameter is typically supported by a bracket every 34 inches. Angle brackets that mount to the back wall extend forward to support a closet rod that is 1 1/4 inches wide.

How far can closet rod span without support?

NOTE: 48″ maximum width without support brackets. Heavy-Duty Closet Pole 1 Closet Pole Sockets 1 pkg.

How much weight can a wardrobe rail hold?

A: With the rail properly mounted into the studs along your back wall, an 8-foot closet can hold up to 1,200 pounds.” Hope that helps. Steve K. 1 of 1 found this helpful.

Can a closet be 20 inches deep?

When designing a closet, consider the specific efficiencies of each different storage element to better serve your closet needs. The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired.

How do you support a long closet rod?

Because these rods are hollow, they often sag when mounted to cover a long distance and loaded with clothing. Reinforce this type of rod by adding a strong wooden dowel through its center, prior to mounting it to the side walls, or you can also add additional external support brackets along the back wall.

How deep should closet rod be?

Opt for a closet rod depth of at least 12 inches. You can avoid this clothing disaster by mounting the rod at least 12 inches from the rear wall of the closet. Keep in mind that the average closet has a depth of 24 inches.

What is the standard closet depth?

A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall. Shelves for women’s shoes should be spaced about 6 to 7 inches apart. Shelves for folded clothes should be placed around 12 inches apart.

How thick should closet shelves be?

The minimum thickness you need for shelves is 1/2 inch, but if you plan to load them with heavy items, use 3/4-inch plywood.

Article first time published on

What are closet rods made of?

Strength: HARDWARE DECOR offers closet rods constructed of three different materials: steel, stainless steel and aluminum. Closet rods made from steel are chrome plated. In addition to being the strongest, they are also very resilient.

How much weight should a closet rod hold?

Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.

Is a round or oval wardrobe rail stronger?

The oval style of rail is stronger in comparison to the round rail due to its shaping. Meanwhile, the oval rail allows you to use longer lengths without a center support. We stock oval wardrobe tubing in a chrome finish to give it a modern touch.

How do you install a wood closet rod?

1. Measure your closet. Specifically, the area (wall to wall) where you plan on placing the rod. …
2. Decide whether you will purchase a rod or make your own. …
3. Install support studs. …
4. Attach and drill brackets. …
5. Place each socket where you made the marks…

Can you hang closet rod with drywall anchors?

To securely install a closet rod in drywall: … Drive screws into the wall stud or drywall anchor, securing the bracket in place. Repeat this process for additional brackets, making sure they are level with the first bracket. Set your closet rod in place and use it to hang your clothing.

Do closet rods need studs?

Installing a closet rod in a closet without conveniently located studs is a simple job that requires no special tools or advanced carpentry skills. Closet rods are typically held by flange-type sockets that are attached to the wall, screwed into framing studs.

Can a closet be 22 deep?

The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.

Is 18 inches deep enough for a closet?

In most places in the U.S., you can’t call it a bedroom if there isn’t a closet. Your building codes may specify minimal dimensions. 24 inches is the standard depth to fit most hangers. 18-20 inches wide was ok in the early 1900’s.

What is the average hanging space per person?

Aim for a minimum of 2.4m of wall space per person (without additional bedroom furniture). Allocate 600mm for the widest items you wish to hang, plus an extra 100mm for easy viewing. You’ll need a corridor of at least 800mm as your ‘walk-in’ space.

How deep does a closet need to be for a washer and dryer?

Minimum space is 40 inches deep and 32 inches wide for a washer and dryer. A side-by-side washer and dryer needs at least 40 and 56 inches of space.

How much does it cost to build a closet?

The cost to build a closet averages $2,005, with a typical range between $1,076 and $2,952. Prices depend primarily on size. Walk-ins are $750 to $3,500, compared to $250 to $1,500 for a reach-in. Solid wood doors and other high-end additions can run the most.

How big should a closet be?

A typical closet is approximately 24-inches deep. A walk-in closet should be at least 36- to 48-inches deep. The width of the closet ideally is half the width of the room, if not more. A standard 12-by-12 bedroom would ideally have a closet 6-feet wide by 48-inches deep.

What type of wood is used for closets?

Wood Custom Closets Plywood is a type of wooden material that is manufactured from thin layers, or plies, of wood veneers. These pieces are glued together with the adjacent layers having alternating directions of the grain. Another popular wood for custom closets is Medium-Density Fiberboards or MDF.

Is MDF good for closets?

MDF may sometimes sag, so make sure you don’t use this material for your closet shelves. If you must, then don’t put anything heavy on MDF shelves. Plywood, although stronger than MDF, may require reinforcements, especially when used for closet shelving.

What kind of wood should I use for built in wardrobes?

Plywood, MDF boards, and particle boards are made out of these panel boards and are widely used for the construction of wardrobes.

How thick are closet rods?

A closet-rod dowel is usually between 1 1/4 inches to 1 3/8 inches in diameter. This diameter allows for plenty of hanging strength.

How do you hang a wooden dowel rod?

Simply drill two 1/4-inch holes in a length of dowel and then mark holes the same distance apart in the shelf from which you want to hang the dowel. Drill holes in the shelf and insert carriage bolts. Affix the dowel to the ends of the bolts with 1/4-inch nuts.

How much weight can Rubbermaid shelving hold?

Total Weight Capacity: 350 lbs.

How much do clothes weigh in a closet?

ItemsWeight (in pounds)Cubic feetWardrobe (single)17525Wardrobe (double)31545Wardrobe (triple)42060Armoire (small)28040

How much weight should a clothes rack hold?

The Standard Clothes Garment Rack can hold up to 120 pounds—impressive considering its affordable price tag. Aside from a rod to hang garments, you’ll get a convenient bottom shelf for shoes, boxes, or anything else you need to keep out of the way.