Class B fires involve flammable and combustible liquids such as gasoline, alcohol, oil-based paints, lacquers. … In fact, if the only fuel burning is the leaking gas, the best method for extinguishing the fire is to shut off the fuel supply.

What is burning in a Class B fire OSHA?

“Class B fire” means a fire involving flammable or combustible liquids, flammable gases, greases and similar materials, and some rubber and plastic materials.

What are Class B fuels?

Class B – Flammable liquids: gasoline, oil, grease, acetone. Any non-metal in a liquid state, on fire.

Which fire is Class B fire?

Class B are flammable liquids fires such as fuel, gasoline, kerosene, white-spirit… Class B are flammable gases fires such as ethanol, propane, butane, acetylene, hydrogen, methane…

Which fire extinguisher is used to extinguish Class B fire?

CO2: A carbon dioxide fire extinguisher works on a Class B fire by expelling CO2 to suffocate the fire, removing the oxygen necessary to keep it burning.

How do you fight Class B fire?

To extinguish a Class B fire, you want to cut off the oxygen. You can use carbon dioxide gas to dilute the oxygen available and stop the burning. Smothering the fire with bicarbonate (baking soda) or potassium carbonate will also work.

What materials make up a Class B fire?

Class B: Flammable liquids such as alcohol, ether, oil, gasoline and grease, which are best extinguished by smothering.

What chemical is in a Class B fire extinguisher?

The primary chemical used to fight these fires is monoammonium phosphate, because of its ability to smother fires in these types of materials. Fire extinguishers with a Class B rating are effective against flammable liquid fires.

What is inside a Class B fire extinguisher?

Because of this, Class A fire extinguishers use water, while Class B fire extinguishers use dry chemicals (foam or powder), such as aqueous film-forming foam, multi-purpose dry chemicals such as ammonium phosphate, and halogenated agents (such as Halon 1301 and Halon 1211) or highly pressurized carbon dioxide.

What is C Class A fire?

A Class C fire is a fire that involves electrical equipment, electrical appliances, or electrical wiring. They are caused by energized electrical elements, such as damaged power cors or overloaded electrical outlets. It is one of the five classes of fires, along with A, B, D, and K.

Article first time published on

Which of the following can be used on Class A and Class B fires?

Dry Chemical Fire Extinguishers The most widely used type of fire extinguisher is the multipurpose dry chemical that is effective on Class A, B, and C fires. This agent also works by creating a barrier between the oxygen element and the fuel element on Class A fires.

When using foam a Class B fire is extinguished by?

Foam extinguishes Class B Fires by covering the flammable liquid with a foam blanket, thus cutting off the oxygen supply from the combustion process. The water content of the foam will help lower the temperature of the flammable liquid.

Which material is a Class B fuel quizlet?

Class B: Flammable liquids and gases such as gasoline, oils, paint, lacquer, and tar.

What does ABC mean on fire extinguisher?

An “ABC” extinguisher will have a label like this, indicating that it may be used on class A, B and C fires. Dry chemical extinguishers put out fire by coating the fuel with a thin layer of dust, separating the fuel from the oxygen in the air.

Which of the following types of surfaces should a Class B fire extinguisher not be used?

Fire buckets can be used filled with water on Class A fires, or with sand to use as an absorbing agent on spilled flammable liquids (Class B). They must not be used with water on burning fat or oil or on electrical appliances.

Which type of extinguishing agent is used to extinguish a Class B fire quizlet?

Halon 1301 and Halon 1211 are most commonly used as extinguishing agents for Class B and Class C fires.

What elements must be present for a fire to burn?

Oxygen, heat, and fuel are frequently referred to as the “fire triangle.” Add in the fourth element, the chemical reaction, and you actually have a fire “tetrahedron.” The important thing to remember is: take any of these four things away, and you will not have a fire or the fire will be extinguished.

What Colour logo is on the neck of a foam extinguisher?

ColourTypeNotesRedWaterNot suitable for electrical or deep fat fires*BlueDry powderNot suitable for electrical fires over 1,000 voltsCreamFoamNot suitable for domestic firesBlackCarbon dioxideSuitable for high and low voltage electrical fires

What are the 5 fire classifications?

Fire is divided into five classes (A, B, C, D, and K) that are primarily based on the fuel that is burning. This classification system helps to assess hazards and determine the most effective type of extinguishing agent.

Does putting water on a fire make it worse?

3. Do NOT pour water on the fire! Since oil and water do not mix, pouring water can cause the oil to splash and spread the fire even worse. In fact, the vaporizing water can also carry grease particles in it, which can also spread the fire.

Where should a Class B fire extinguisher be placed?

• Class A: Locations that contain ordinary combustible materials, including offices, classrooms, and assembly halls.
• Class B: Workshops, storage areas, garages, warehouses, or service and manufacturing areas that contain flammable liquids or gasses.

What are the classes of fire and their extinguishers?

Class of FireDescriptionClass A FiresFires in ordinary combustible materials, such as wood, cloth, paper, rubber, and many plastics.Class B FiresFires in flammable liquids, combustible liquids, petroleum greases, tars, oils, oil-based paints, solvents, lacquers, alcohols, and flammable gases.

What is D class fire?

Class D fires involve combustible metals, such as magnesium, titanium, and sodium. Extinguishers with a D rating are designed to extinguish fires involving combustible metals. Note: Common extinguishing agents may react with a combustible metal fire causing the severity of the fire to increase.

What is blue fire extinguisher?

The five fire extinguisher colours are: Blue – Dry Powder. Black – Carbon Dioxide (CO2) Cream – Foam. Red – Water (Spray and Mist)

What are Class F fires?

Class F Fire Class F fires are fuelled by cooking fats or oils e.g. in a kitchen setting. The appropriate extinguisher used to tackle a class F fire is a ‘wet chemical’ extinguisher.

What is CO2 extinguisher?

CO2 fire extinguishers contain pure carbon dioxide which is a clean extinguishant, leaving no residue. Suitable for class B flammable liquid fires (petrol, oil, solvents), and recommended for use on live electrical equipment.

What types of materials do Class B fire involves quizlet?

Class B fires involve flammable and combustible liquids and gases, such as alcohol, gasoline, lubricating oils, and liquefied petroleum gas (LPG). Agents used to extin- guish special hazard Class B fires are carbon dioxide (CO2), dry chemical, and Class B foam. Class C fires involve energized electrical equipment.

Which extinguishing agent is effective on Class B and C fires but has limited use on Class A fires?

Water These extinguishers contain water and compressed gas and should only be used on Class A (ordinary combustibles) fires. Carbon Dioxide (CO2) extinguishers are most effective on Class B and C (liquids and electrical) fires. Since the gas disperses quickly, these extinguishers are only effective from 3 to 8 feet.

Which extinguishing agent is effective on Class B and C fires but has limited use on Class A fires quizlet?

CO2 extinguishers are most effective against Class B and C fires. Because the discharge is in the form of a gas, they have limited reach and the gas can be dispersed by wind.

What extinguisher is Class C?

Tackling A Class C Fire The only extinguisher which is safe to use on a Class C fire is a dry powder extinguisher. It works by cooling the flames until there is no longer enough heat to keep them burning. But using any other type of extinguisher will instead just spread the fuel and flames.

What does 4A 80B C mean?

Buckeye ABC Dry Chemical Extinguisher 4A:80B:C is designed for use on Class A fires (ordinary combustibles), Class B fires (flammable liquids and gases), and Class C fires (energized electrical equipment).