All Eureka vacuum cleaner parts are specific to the model of the vacuum cleaner, so when searching for the correct part we ask that you have your model number handy. You will find your model number on a metallic silver sticker. It’s usually located on the back or bottom of the vacuum cleaner.

How do I remove the brush from my Eureka Airspeed?

1. Step 1 Brush Roll. …
2. Using a Phillips #2 screwdriver, remove the four screws from each corner of the brush roll cover. …
3. Remove the brush cover from the vacuum base, by pulling straight up. …
4. Firmly press upwards from below the brush roll on the side opposite the belt.

Where is the filter on a Eureka vacuum?

The HEPA exhaust filters on Eureka vacuums are beneath the dust cup and bin unit. Lift the latch on top of the dust cup unit to lift the entire thing off of the base of the vacuum. Remove the clear filter cover underneath.

How do you open a Eureka vacuum cleaner?

1. Turn off the vacuum cleaner and unplug it from the power outlet. …
2. Press the dust cup release button located on the top right side of the cleaner near the handle, and pull the dust cup out of the vacuum housing.

How do you use the hose on a Eureka vacuum?

Slide handle into top of vacuum cleaner. Push down until it clicks. Insert bent end of hose into opening at back of dust cup. Twist hose clockwise to lock.

Is Eureka vacuum still in business?

In 2004 the use of the Eureka company name was discontinued and replaced with Electrolux Home Products Division. … In 2016 Eureka was purchased by Midea Group, parent company of Midea America Corp.

What belt does Eureka Airspeed one take?

Eureka Air Speed models uses the Eureka Style U extended life belt 61120D.

How do you remove floor nozzle from Eureka NES210?

Thank you for your inquiry pertaining to the Eureka NES210. To remove the floor nozzle, simply grip the nozzle and firmly pull apart from the dust cup.

How do you take the handle off a Eureka vacuum?

You can insert the crevice tool or dusting brush into the hose handle. You can insert the crevice tool or dusting brush into the extension wand.. Remove hose handle from the hose holder. Remove the handle from the body of the vacuum by pressing the extension wand release and pulling up on the handle.

How do you clean a Eureka dust cup filter?

1. Open the dust cup filter lid, located on the top of the cup.
2. Remove the dust cup foam filter.
3. Hand wash the foam filter.
4. Allow filter to dry 24 hours before putting back into the vacuum cleaner.

Article first time published on